HP EliteBook 800 EliteBook 820 G4 Notebook PC EliteBook 828 G4 Notebook PC Mai - Page 43
The rubber-screw cover locations are as shown in the following image
![]() |
View all HP EliteBook 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
The rubber-screw cover locations are as shown in the following image: NOTE: If installing new rubber screw covers, carefully inspect for adhesive tape liner inside the cap and remove if present. To properly insert the rubber covers, be sure to orient the covers in the correct direction: 1. Place the lower edge into the recess (1), followed by the higher edge (2). Component replacement procedures 33
![](/manual_guide/products/hewlettpackard-elitebook-800-elitebook-820-g4-notebook-pc-elitebook-828-g4-notebook-pc-maintenance-service-guide-8a8bc93/43.png)
The rubber-screw cover locations are as shown in the following image:
NOTE:
If installing new rubber screw covers, carefully inspect for adhesive tape liner inside the cap and
remove if present.
To properly insert the rubber covers, be sure to orient the covers in the correct direction:
1.
Place the lower edge into the recess
(1)
, followed by the higher edge
(2)
.
Component replacement procedures
33