HP EliteBook 800 EliteBook 820 G4 Notebook PC EliteBook 828 G4 Notebook PC Mai - Page 60
Display assembly, Remove the 4 Phillips M2.5×5.0 screws
View all HP EliteBook 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Display assembly Description Display panel assembly, touch screen NOTE: Non-touch display assemblies are spared at the subcomponent level only. NOTE: Touch display assemblies are only spared as whole units Spare part number 920050-001 Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Remove the battery (see Battery on page 35). Remove the display assembly: 1. Position the computer upside down. 2. Disconnect the antennas (1) from the WWAN module (if equipped). 3. Disconnect the antennas (2) from the WLAN module (if equipped). 4. Remove the antennas cables (if equipped) from the routing path along the base of the computer (3). 5. Disconnect the display cable from the system board (4). 6. Remove the 4 Phillips M2.5×5.0 screws (1) from the display hinges. 50 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts