HP EliteBook 800 EliteBook 820 G4 Notebook PC EliteBook 828 G4 Notebook PC Mai - Page 76
Fingerprint reader assembly, Remove the Phillips M2.0x2.0 screw
View all HP EliteBook 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Fingerprint reader assembly Description Fingerprint reader assembly (includes cable) Fingerprint reader bracket NOTE: The fingerprint reader bracket is included in the Plastics Kit. Spare part number 821693-001 821675-001 (Plastics Kit) Before removing the fingerprint reader assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Remove the battery (see Battery on page 35). 6. Remove the system board (see System board on page 61). Remove the fingerprint reader assembly: 1. Remove the Phillips M2.0x2.0 screw (1) that secures the bracket to the computer. 2. Lift the bracket off the fingerprint reader board (2). 3. Remove the fingerprint reader board and cable assembly from the computer (3). Reverse this procedure to install the fingerprint reader assembly. 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts