HP EliteBook 800 EliteBook 820 G4 Notebook PC EliteBook 828 G4 Notebook PC Mai - Page 68
Smart card reader board, Disconnect the touchpad cable from the smart card reader board
View all HP EliteBook 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Smart card reader board Description Smart card reader board (includes cable) Spare part number 914963-001 Before removing the card reader board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Remove the battery (see Battery on page 35). Remove the smart card reader board: NOTE: Make sure nothing is installed in the card reader before removing it. 1. Disconnect the cable from the smart card reader board (1). 2. Disconnect the touchpad cable from the smart card reader board (2). 3. Remove the 3 Phillips M2.0x2.0 screws that secure the bracket to the top cover (3), and then remove the bracket from atop the card reader board (4). 4. Lift the smart card reader board from the computer (5). Reverse this procedure to install the smart card reader board. 58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts