HP EliteBook 800 EliteBook 820 G4 Notebook PC EliteBook 828 G4 Notebook PC Mai - Page 46
Hard drive, Remove the bottom cover see
View all HP EliteBook 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Hard drive Description 1 TB, 5400 rpm, 7 mm 500 GB, 7200 rpm, 7 mm, FIPS 500 GB, 7200 rpm, 7 mm, Opal-2 500 GB, 7200 rpm, 7 mm 500 GB, 5400 rpm, 7 mm, hybrid, 8 GB cache Hard Drive Hardware Kit (includes cover and screws) Spare part number 832077-001 820572-001 820573-001 703267-001 732000-001 821665-001 NOTE: Only one mass storage device (hard drive or a solid-state drive) can be installed. Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 30). 5. Remove the battery (see Battery on page 35). To remove a hard drive: 1. Loosen the 4 captive screws (1) that secure the hard drive to the chassis. 2. Slide the hard drive (2) away from the connector. 36 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts