HP Envy 15-1000se HP ENVY 15 - Maintenance and Service Guide - Page 57
RTC battery, Detach the RTC battery
View all HP Envy 15-1000se manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
RTC battery Removal and replacement procedures Description RTC battery (includes double-sided tape) Spare part number 576848-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the memory module compartment cover (see "Expansion memory module" on page 4-8). 6. Remove the top cover (see "Top cover" on page 4-10). Remove the RTC battery: 1. Disconnect the RTC battery cable 1 from the system board. 2. Detach the RTC battery 2 from the system board. (The RTC battery is attached to the system board with double-sided tape.) 3. Remove the RTC battery. Reverse this procedure to install the RTC battery. Maintenance and Service Guide 4-19