HP Envy 15-1000se HP ENVY 15 - Maintenance and Service Guide - Page 65

Video fan/heat sink assembly

Page 65 highlights

Video fan/heat sink assembly Removal and replacement procedures Description Video fan/heat sink assembly (includes replacement thermal material) Spare part number 576838-001 Before removing the video fan/heat sink assembly, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the memory module compartment cover (see "Expansion memory module" on page 4-8). 6. Remove the top cover (see "Top cover" on page 4-10). Remove the video fan/heat sink assembly: 1. Disconnect the fan cable 1 from the system board. 2. Following the 1, 2, 3 sequence stamped into the video fan/heat sink assembly, loosen the three Phillips PM2.0×6.0 captive screws 2 that secure the video fan/heat sink assembly to the system board. 3. Remove the two Phillips PM2.0×3.0 screws 3 that secure the video fan/heat sink assembly to the system board. 4. Remove the video fan/heat sink assembly 4. ✎ Due to the adhesive quality of the thermal material located between the video fan/heat sink assembly and system board components, it may be necessary to move the video fan/heat sink assembly from side to side to detach it. Maintenance and Service Guide 4-27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131

Removal and replacement procedures
Maintenance and Service Guide
4–27
Video fan/heat sink assembly
Before removing the video fan/heat sink assembly, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-7
).
5. Remove the memory module compartment cover (see
“Expansion memory module” on page 4-8
).
6. Remove the top cover (see
“Top cover” on page 4-10
).
Remove the video fan/heat sink assembly:
1. Disconnect the fan cable
1
from the system board.
2. Following the 1, 2, 3 sequence stamped into the video fan/heat sink assembly, loosen the three Phillips
PM2.0×6.0 captive screws
2
that secure the video fan/heat sink assembly to the system board.
3. Remove the two Phillips PM2.0×3.0 screws
3
that secure the video fan/heat sink assembly to the
system board.
4. Remove the video fan/heat sink assembly
4
.
Due to the adhesive quality of the thermal material located between the video fan/heat sink assembly and
system board components, it may be necessary to move the video fan/heat sink assembly from side to
side to detach it.
Description
Spare part number
Video fan/heat sink assembly (includes replacement thermal material)
576838-001