HP Kayak XU 03xx HP Kayak XU Series 03xx, Accessories Installation Guide - Page 13
Connecting Devices, Which Data, Connectors to Use
View all HP Kayak XU 03xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
HP Kayak XU 03xx PC Workstation - Installing Accessories In Your HP PC Workstation Installing Mass Storage Devices Connecting Devices If you add an IDE Zip drive, hard disk drive, CD-ROM drive, CD-RW drive, or tape drive, you need to connect it to power and data cables. The data cables and connectors provided are shown below: 16-bit SCSI with five 68-pin SCSI connectors Cable with one connector for 3.5-inch Flexible Disk Drive 34-pin connector 68-pin SCSI connectors 16-bit External 68pin SCSI connector 8-bit SCSI with two 50-pin SCSI connectors Cable with two 40-pin connectors for IDE Drives, such as CD-ROM Drives, Zip Drives or Hard Disk Drives. Which Data Connectors to Use Your PC Workstation has the following cables and connectors which may be used by mass storage devices: • A cable for UltraWide 16-bit SCSI with five connectors. • A cable for UltraNarrow 8-bit SCSI with two connectors. • A flexible disk drive cable with a single connector. This supports a flexible disk drive (the connector is attached to the flexible disk drive supplied). • An Ultra ATA/33 IDE cable that supports two fast IDE devices. If you install a CD-ROM drive, CD-RW drive, a Zip drive, or a third hard disk drive, connect it to this cable. English 13