HP Kayak XU 03xx HP Kayak XU Series 03xx, Accessories Installation Guide - Page 25
Installing Accessory Boards, Installing the Board
![]() |
View all HP Kayak XU 03xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
CAUTION NOTE HP Kayak XU 03xx PC Workstation - Installing Accessories In Your HP PC Workstation Installing Accessory Boards Installing Accessory Boards Static electricity can damage electronic components. Turn OFF all equipment. Don't let your clothes touch the accessory. To equalize the static electricity, rest the accessory bag on top of the computer while you are removing the accessory from the bag. Handle the accessory as little as possible and with care. The PC Workstation has the following accessory board slots: • Slot AT 2 (the bottom slot) for full-length 16-bit ISA boards • Slot AT 1/PCI 4 for either a 16-bit ISA board or a full-length 32-bit PCI board • Slot PCI 3 can be used for a full-length 32-bit PCI board (and also features the RAIDport™ connector) • Slot PCI 2 for a full-length 32-bit PCI board • Slot PCI 1 for a full-length 32-bit PCI board • Slot AGP for the video adapter board Installing the Board 1 Disconnect the computer's power cord and any LAN connection or telecommunications cable. PCI boards are configured automatically when installed in the PC Workstation. 2 Remove the computer's cover ("Removing and Replacing the Cover", on page 3) and carefully place the PC Workstation on its side. 3 Find an empty slot. Identify the location of the slot type you want to use (ISA or PCI). Some boards may have preferred locations and special installation instructions detailed in their manuals. English 25
![](/manual_guide/products/hewlettpackard-kayak-xu-03xx-hp-kayak-xu-series-03xx-accessories-installation-guide-c78a864/25.png)