HP Kayak XU 03xx HP Kayak XU Series 03xx, Accessories Installation Guide - Page 2
Supported HP Accessories, Contact your dealer for an up-to-date list of supported devices.
View all HP Kayak XU 03xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
HP Kayak XU 03xx PC Workstation - Installing Accessories In Your HP PC Workstation Supported HP Accessories Supported HP Accessories Internal Mass Storage Devices Main Memory Upgrades (DIMM slots for ECC SDRAM): - 32 MB (unbuffered) - 64 MB (un-buffered) - 128 MB (un-buffered) - 256 MB (Registered - see note below) 5 Pairs of Rails for Front Access Devices: - 3.5-inch disk drive rails - 5.25-inch disk drive rails Up to six accessory boards can be installed: - One AGP slot (graphics) - Three 32-bit PCI slots (one used by SCSI/LAN board, one with RAIDport) - One combination PCI or ISA slot - One 16-bit ISA slot Front Access Drives, for example: - 3.5-inch 1.44 MB flexible disk drive (one third height) - 5.25-inch 1.2 MB flexible disk drive (half height) - 5.25-inch tape drive (half height) Contact your dealer for an up-to-date list of supported devices. NOTE 256 MB registered ECC SDRAM DIMMs cannot be used with unbuffered 32 MB, 64 MB or 128 MB DIMMs 2 English