HP Kayak XU 03xx HP Kayak XU Series 03xx, Accessories Installation Guide - Page 21

HP Kayak XU 03xx PC Workstation - Installing Accessories In Your HP PC Workstation Installing Mass Storage Devices Completing the Installation of a Hard Disk Drive When a SCSI Hard Disk Drive Is Installed 1 Switch on the computer. 2 To ensure compatibility, use the FDISK utility to delete any partitions on the new hard disk. 3 Re-boot the computer. Refer to the operating system documentation for information on formatting a drive. When an IDE Drive Is Installed 1 Switch on the computer. 2 To display the device in POST, press re-starts. while the PC Workstation 3 If an error message appears, follow the instructions provided by the Error Message Utility. When prompted, press to run the Setup program. 4 Select the Advanced menu, and the IDE Devices submenu. In the Primary Master item, check that the details for the device have been correctly detected by the Setup program. 5 Press to save and exit Setup. Refer to the operating system documentation for information on formatting a drive. NOTE If an IDE drive is removed, switch on the computer. The system BIOS will detect that the device is missing. Press to confirm that you want to remove the device. The system configuration will be updated automatically. Installing a Drive in a Front-Access Shelf These instructions explain how to install a drive (such as a flexible disk drive, a CD-ROM drive, CD-RW drive, or a tape drive) in one of the front-access drive shelves. You should also refer to the manual supplied with the drive for any additional installation instructions. English 21