HP Kayak XW U3-W3 HP Kayak XW (Series U3-W3), Accessories Installation Guide - Page 14
Installing a Hard Disk Drive in an Internal Shelf, guide and lift it out of the PC Workstation's case.
![]() |
View all HP Kayak XW U3-W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CAUTION HP Kayak XW U3 & W3 PC Workstation - Installing Accessories In Your HP PC Workstation Installing Mass Storage Devices Installing a Hard Disk Drive in an Internal Shelf Hard disk drives larger than one inch (1") in height can only be housed in the lower internal shelf. 1 Disconnect the computer's power cord and any telecommunications cable. 2 Remove the computer's cover (refer to page 3). 3 Remove the fan connection to the system board (refer to the illustration on page 6). 4 Press the retaining buttons on each side of the HP UltraFlow airflow guide and lift it out of the PC Workstation's case. 5 Slide the power supply out to improve access to the internal shelf (refer to page 6). 6 Slide the drive into position in the first internal shelf and align the screw holes in the drive with the four self-retaining screws in the drive shelf. Screw hole Align the hole in the drive with the hole in the drive shelf Self-retaining screw 14 English
![](/manual_guide/products/hewlettpackard-kayak-xw-u3w3-hp-kayak-xw-series-u3w3-accessories-installation-guide-80cf6a5/14.png)