HP Kayak XW U3-W3 HP Kayak XW (Series U3-W3), Accessories Installation Guide - Page 26

NOTE HP Kayak XW U3 & W3 PC Workstation - Installing Accessories In Your HP PC Workstation Installing a Processor Installing a Processor Some operating systems support a second processor for enhanced performance. Contact your authorized reseller for up-to-date information. The Setup program provides an option to disable the second processor. 1 Disconnect the computer's power cord and any LAN or telecommunications cable. 2 Remove the computer's cover (refer to page 3). 3 Press the retaining buttons on each side of the HP UltraFlow airflow guide and lift it partly out of the PC Workstation's case. Fan connection to system board HP UltraFlow Airflow Guide Retaining button 4 Remove the fan connection to the system board and lift the airflow guide completely out of the PC Workstation's case. 5 Slide out the power supply to improve access to the processor sockets refer to page 6) and carefully place the PC Workstation on its side. 6 Remove the transparent airflow guide covering the processor sockets. 26 English