HP Kayak XW U3-W3 HP Kayak XW (Series U3-W3), Accessories Installation Guide - Page 2

HP Kayak XW U3 & W3 PC Workstation - Installing Accessories In Your HP PC Workstation Supported HP Accessories Supported HP Accessories Internal Mass Storage Devices Main Memory Upgrades (DIMM slots for ECC SDRAM): - 32 MB (unbuffered) - 64 MB (un-buffered) - 128 MB (un-buffered) - 256 MB (Registered - see note below) 5 Pairs of Rails for Front Access Devices: - 3.5-inch disk drive rails - 5.25-inch disk drive rails Up to six accessory boards can be installed: - One AGP slot (graphics) - Three 32-bit PCI slots (one used by SCSI/LAN board, one with RAIDport) - One combination PCI or ISA slot - One 16-bit ISA slot Front Access Drives, for example: - 3.5-inch 1.44 MB flexible disk drive (one third height) - 5.25-inch 1.2 MB flexible disk drive (half height) - 5.25-inch tape drive (half height) Contact your dealer for an up-to-date list of supported devices. NOTE 256 MB registered ECC SDRAM DIMMs cannot be used with unbuffered 32 MB, 64 MB or 128 MB DIMMs Installing More Memory on the Video Adapter To add a texture module to the HP Visualize FX4, refer to the Texture Module Accessory User's Guide shipped with this accessory. 2 English