HP Kayak XW U3-W3 HP Kayak XW (Series U3-W3), Accessories Installation Guide - Page 7
Replacing the Power, Supply after Installing, Accessories, WARNING
![]() |
View all HP Kayak XW U3-W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
WARNING HP Kayak XW U3 & W3 PC Workstation - Installing Accessories In Your HP PC Workstation Moving the Power Supply To avoid electrical shock, do not open the power supply. 6 Slide the power supply out of the computer until it stops-the power supply unit remains connected to the computer. Slide the power supply unit clear of the computer Power Supply Replacing the Power Supply after Installing Accessories 1 Check that all internal cables are safely routed. 2 Slide the power supply back into the computer. 3 Tighten the four self-retaining screws. 4 Replace the HP UltraFlow airflow guide. 5 Reconnect the fan to the system board. English 7
![](/manual_guide/products/hewlettpackard-kayak-xw-u3w3-hp-kayak-xw-series-u3w3-accessories-installation-guide-80cf6a5/7.png)
English
7
HP Kayak XW U3 & W3 PC Workstation
— Installing Accessories In Your HP PC Workstation
Moving the Power Supply
WARNING
To avoid electrical shock, do not open the power supply.
6
Slide the power supply out of the computer until it stops—the
power supply unit remains connected to the computer.
Replacing the Power
Supply after Installing
Accessories
1
Check that all internal cables are safely routed.
2
Slide the power supply back into the computer.
3
Tighten the four self-retaining screws.
4
Replace the HP UltraFlow airflow guide.
5
Reconnect the fan to the system board.
Slide the power
supply unit clear of
the computer
Power Supply