HP Kayak XW U3-W3 HP Kayak XW (Series U3-W3), Accessories Installation Guide - Page 9
each additional memory module you want to install., into the connector
View all HP Kayak XW U3-W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
HP Kayak XW U3 & W3 PC Workstation - Installing Accessories In Your HP PC Workstation Installing Memory 8 The location of the memory module slots is shown here. 9 Slide the memory module into the slot at 90° to the system board (with the cutouts furthest away from the processor). Slide the memory module into the slot at 90o to the system board Memory module cutouts Push the module until the retaining clips click into position 10 Firmly press the memory module completely into the connector until the retaining clips click into position. Repeat this procedure for each additional memory module you want to install. 11 Install any other accessories if necessary, then replace all units and reconnect all cables and power cords. Replace the cover (refer to page 4). 12 Check the HP Summary Screen to verify the new configuration. English 9