HP LH4r HP Netserver LPr Rack Cabling Guide - Page 21
Placement of PDUs
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 2 Connecting and Routing Cables to the HP NetServer LPr 10-Amp and 16-Amp, with Jumper Cord Available as E7672A Daisy Chain to 16-Amp PDU 10-Amp Wide Ranging, 208/230 VAC Order Separately as E7670A 16-Amp, 110 VAC PDU, E7675A 16-Amp, Wide Ranging, 208/230 VAC, E7671A, Power Cord Separately Orderable Figure 2-2. Three Types of PDUs Placement of PDUs To determine where the PDU mounts, eliminate positions directly behind the equipment listed in Table 2-2. (PDUs conflict with these units when mounted in the same space). Then decide the most convenient location. The PDU can be mounted vertically using the non-EIA mounting holes on the outer edges of the vertical columns, or it can be mounted horizontally between the columns. With the extended rear brackets that come with the LPr, you can also mount a PDU directly behind a LPr. Figure 2-3 shows possible PDU positions and orientations. 17