HP LH4r HP Netserver LPr Rack Cabling Guide - Page 41
Description of the Recommended 200/208 VAC Configuration
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 2 Connecting and Routing Cables to the HP NetServer LPr Description of the Recommended 200/208 VAC Configuration Figure 2-12 shows a UPS connected to the power mains through a captive cord terminated with an L6-20P plug. The UPS has five receptacles for use in the rack: two NEMA 5-15 (on the right rear) providing 110 VAC, two L6-20R, and one L6-30R, providing 208VAC. The E7671A PDU connects to the UPS via a detachable cord with an L6-20P plug. This cord connects to the PDU with an IEC 320 C19 plug. The 200/208 VAC PDU has two IEC 320, C19 and six IEC 320, C13 receptacles. A second PDU (E7672A) is available, which can be daisychained to the 16-amp unit, providing ten more C13 receptacles. The fan (not required if perforated doors or no doors are used front and back) plugs into one of the C13 receptacles on the PDU. 37