HP LH4r HP Netserver LXr 8000 PCI Hot Plug Replacement - Page 22
The green Power LED must be OFF. See and Table 6-1.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 6 Addendum HP NetServer LXr 8000 Installation Guide 6. Verify power to the desired PCI slot is turned off, by checking the two LEDs associated with the desired PCI slot. The green Power LED must be OFF. See Figure 6-16 and Table 6-1. PCI Hot-Plug LEDs Figure 6-16. Hot-Plug Slots and LEDs The following table decodes the LEDs for each PCI slot: Table 6-1. PCI LED Power Code Green LED On On Off Off Amber LED Indicates This Status Off Power to the slot is on, and the slot is operating normally. Do not remove the board from the slot. On Power to the slot is on, but the slot needs attention. See Help files for choices. Do not remove the board from the slot. On Power to the slot is off, and the slot needs attention. You can remove the board from this slot. Off Power to the slot is off. You can safely remove the board from this slot. 20