HP LH4r HP Netserver LXr 8000 PCI Hot Plug Replacement - Page 31

Insert the screws and use a T-25 driver to secure the flanges to the front columns of the rack.

Page 31 highlights

Chapter 6 Addendum HP NetServer LXr 8000 Installation Guide CAUTION To prevent damage to cables, or a disruption in service due to a disconnection of cables, use caution when sliding the chassis into the rack. 12. If chassis work is complete, slide the NetServer chassis back into the rack. See Figure 6-23. Press in the release latch on each slide and push the server into the rack Flanges Figure 6-23. Siding the NetServer Back into the Rack 13. Reconnect any cables you may have removed, including cables to the accessory boards, before continuing. 14. Insert the screws and use a T-25 driver to secure the flanges to the front columns of the rack. 15. Re-install the bezel to the front of the NetServer. 16. Return the NetServer to normal operation. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31

Chapter 6 Addendum
HP NetServer LXr 8000 Installation Guide
29
CAUTION
To prevent damage to cables, or a disruption in service due to a disconnection of cables, use
caution when sliding the chassis into the rack.
12.
If chassis work is complete, slide the NetServer chassis back into the rack. See Figure 6-23.
Press in the release latch on
each slide and push the
server into the rack
Flanges
Figure 6-23. Siding the NetServer Back into the Rack
13.
Reconnect any cables you may have removed, including cables to the accessory boards, before continuing.
14.
Insert the screws and use a T-25 driver to secure the flanges to the front columns of the rack.
15.
Re-install the bezel to the front of the NetServer.
16.
Return the NetServer to normal operation.