HP LH4r Pedestal-to-Rack Conversion Guide - Page 3

Contents Preface ...1 About this Guide 1 Related Documentation 2 Tools You Need 2 1 Introduction ...3 Overview...3 Warnings ...4 Verify Contents 6 Prepare for Installation 7 2 Remove Bezel, Cover, and Components 9 Overview of Removal of Front Bezel, Rack Rail Cover, and Components ........9 Disconnect the NetServer 9 Remove the Front Bezel and Rack Rail Cover 11 Remove the Front Bezel 11 Remove the Rack Rail Cover 12 Lighten the NetServer 14 Remove Hot-Swap Hard Disk Drives 14 Remove Power Supply Modules 15 Move the NetServer 17 Remove the Casters 17 3 Conversion: Install Components, Cover, and Front Bezel 19 Overview of Conversion to Rack-Optimized Configuration 19 Install Memory or Accessory Boards 19 Install the Lifting Handles 20 Reorient the Control Panel 21 Install the NetServer in the Rack 24 Attaching the Cable Management Arm 29 Replace Power Supply Modules and Hard Disk Drives 31 Install Chassis Retention Bracket when Shipping an HP Rack 32 Install the New Front Bezel 33 Prepare the Front Bezel 33 Attach the Front Bezel 35 Reconnect the Power Cords and Cables 37 iii