HP LH4r Pedestal-to-Rack Conversion Guide - Page 30
Position Rack Nuts for Chassis Retention Bracket, Rack Nuts, Right Rear Column, of HP Rack
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 3 Conversion: Install Components, Cover, and Front Bezel Right Rear Column of HP Rack Rack Nuts Hole 13 above Base Line Hole 9 above Base Line Figure 3-5. Position Rack Nuts for Chassis Retention Bracket 5. Install the rack slides (slide members). 6. Install the NetServer onto the rack slides. 7. Remove the four lifting handles from the NetServer after the NetServer is installed onto the rack slides and the screws holding the NetServer to the slides are tightened. 26
Chapter 3
Conversion: Install Components, Cover, and Front Bezel
26
Rack Nuts
Right Rear Column
of HP Rack
Hole 13 above Base Line
Hole 9 above Base Line
Figure 3-5. Position Rack Nuts for Chassis Retention Bracket
5.
Install the rack slides (slide members).
6.
Install the NetServer onto the rack slides.
7.
Remove the four lifting handles from the NetServer after the NetServer is
installed onto the rack slides and the screws holding the NetServer to the
slides are tightened.