HP LaserJet 5L Service Manual - Page 119
DC Controller Removal 3 of 3
View all HP LaserJet 5L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Figure 6-42 9 Remove the (7) remaining connectors (Figure 6-42, callout 1). 10 Remove the screws (5) that secure the DC Controller to the metal case (Figure 6-42, callout 2). Caution Note DC Controller Removal (3 of 3) 11 Remove the DC Controller by lifting gently on the side opposite the formatter, then sliding it out. Be careful not to rotate the DC Controller as you remove it. When ordering, the DC Controller does not come with any connectors. Use the current connectors or refer to the connector chart in Chapter 8 for ordering information. 6 - 46 Removal and Replacement
9
Remove the (7) remaining connectors (Figure 6-42, callout 1).
10
Remove the screws (5) that secure the DC Controller to the metal case (Figure 6-42,
callout 2).
DC Controller Removal (3 of 3)
11
Remove the DC Controller by lifting gently on the side opposite the formatter, then
sliding it out.
Caution
Be careful not to rotate the DC Controller as you remove it.
Note
When ordering, the DC Controller does not come with any connectors. Use the
current connectors or refer to the connector chart in Chapter 8 for ordering
information.
Figure 6-42
6 - 46
Removal and Replacement