HP M1522nf Service Manual - Page 52
Clean the paper path, Clean the paper path from HP ToolboxFX
UPC - 883585238880
View all HP M1522nf manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Clean the paper path During the printing process, paper, toner, and dust particles can accumulate inside the product. Over time, this buildup can cause print-quality problems such as toner specks or smearing. This product has a cleaning mode that can correct and prevent these types of problems. Specks Smearing Clean the paper path from HP ToolboxFX Use HP ToolboxFX to clean the paper path. This is the recommended cleaning method. If you do not have access to HP ToolboxFX, use the method in Clean the paper path from the product control panel on page 34. 1. Make sure that the product is turned on and in the Ready state, and that media is loaded in tray 1 or tray 2. 2. Open HP ToolboxFX, click the product, and then click the System Settings tab. 3. Click the Service tab, and then click Start. A page feeds through the product slowly. Discard the page when the process is completed. Clean the paper path from the product control panel If you do not have access to HP ToolboxFX, you can print and use a cleaning page from the product control panel. 1. Press Setup . 2. Use the arrow buttons to select the Service menu, and then press OK. 3. Use the arrow buttons to select Cleaning mode, and then press OK. 4. Load plain letter or A4 paper when you are prompted. 5. Press OK again to confirm and begin the cleaning process. A page feeds through the product slowly. Discard the page when the process is completed. Calibrate the scanner During the printing process, paper, toner, and dust particles can accumulate inside the product. Over time, this buildup can cause print-quality problems such as toner specks or smearing. This product has a cleaning mode that can correct and prevent these types of problems. 34 Chapter 3 Maintenance ENWW