HP M3027 Service Manual - Page 212
Does the device select the correct trays
UPC - 882780570054
View all HP M3027 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 212 highlights
8. Does the device select the correct trays? YES For other problems, check the table of contents or the index in this manual, or see the printerdriver online Help. NO The device pulls ● media from the wrong tray. ● ● ● An optional tray is not ● working correctly. ● ● ● A message other than ● READY appears on the control-panel display. Make sure that you have selected the correct tray. (See the user guide.) Make sure that trays are correctly configured for size and type. (See the user guide.) Print a configuration page to see current tray settings. (See Use information pages on page 45.) Make sure that the tray selection (Source) or Type in the printer driver or program is set correctly. (The printer driver and program settings override the device control-panel settings.) By default, media loaded in tray 1 will be printed first. If you do not want to print from tray 1, remove any media loaded in the tray or change the USE REQUESTED TRAY setting. (See the user guide.) Change TRAY 1 SIZE and TRAY 1 TYPE to a setting other than ANY. Print a configuration page to verify that the tray is installed correctly and is functional. (See Use information pages on page 45.) Configure the printer driver to recognize the installed tray. (See the printer driver online Help.) Turn the device off, and then turn it on again. Verify that you are using the correct optional tray for the device. See Control-panel messages on page 201. 200 Chapter 6 Troubleshooting ENWW