HP M3027x HP LaserJet M3027/M3035 MFP - User Guide for Model Numbers CC476A/CC - Page 44
Jetdirect menus continued, Menu item, Sub-menu item, Values and Description, CAUTION
UPC - 883585038671
View all HP M3027x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Table 2-11 Jetdirect menus (continued) Menu item Sub-menu item AppleTalk Enable Sub-menu item DLC/LLC Enable Security Secure Web Firewall Reset Security Diagnostics Embedded Test LAN HW Test HTTP Test Values and Description Off (default): Disable the AppleTalk protocol. On: Enable the AppleTalk protocol. Off (default): Disable the DLC/LLC protocol. On: Enable the DLC/LLC protocol. For configuration management, specify whether the embedded Web server will accept communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. HTTPS Required: For secure, encrypted communications, only HTTPS access is accepted. The print server will appear as a secure site. HTTP/HTTPS optional: Access using either HTTP or HTTPS is permitted. Specify the Firewall status on the print server. Keep: Firewall status remains the same as currently configured. Disable: Firewall operation on the print server is disabled. Specify whether the current security settings on the print server will be saved or reset to factory defaults. No*: The current security settings are maintained. Yes: Security settings are reset to factory defaults. This menu provides tests to help diagnose network hardware or TCP/IP network connection problems. Embedded tests help to identify whether a network fault is internal or external to the device. Use an embedded test to check hardware and communication paths on the print server. After you select and enable a test and set the execution time, you must select Execute to initiate the test. Depending on the execution time, a selected test runs continuously until either the device is turned off, or an error occurs and a diagnostic page is printed. CAUTION: Running this embedded test will erase your TCP/IP configuration. This test performs an internal loopback test. An internal loopback test will send and receive packets only on the internal network hardware. There are no external transmissions on your network. Select Yes to choose this test, or No to not choose it. This test checks operation of HTTP by retrieving predefined pages from the device, and tests the embedded Web server. Select Yes to choose this test, or No to not choose it. 32 Chapter 2 Control panel ENWW