HP M3027x HP LaserJet M3027/M3035 MFP - User Guide for Model Numbers CC476A/CC - Page 50
Fax Setup menu continued, Menu item, Sub-menu item, Values, Description
UPC - 883585038671
View all HP M3027x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Table 2-12 Fax Setup menu (continued) Menu item Sub-menu item Sub-menu item Dialing Prefix Billing Codes Fax Receive Settings Rings To Answer Minimum Length Ring Interval Ring Frequency Ringer Volume Blocked Fax Numbers Add Blocked Numbers Remove Blocked Numbers Clear All Blocked Numbers Values Description Off (default) Custom Off (default) Custom Use this feature to specify a prefix number that must be dialed when sending faxes from the device. When billing codes are enabled, a prompt appears that asks the user to enter the billing code for an outgoing fax. The range is between 1 and 16 digits. The default is 1 digit. The range varies by location. The factory default is 2 rings. Use this feature to specify the number of rings that must occur before the fax modem answers. Default (default) Custom Use this feature to control the time between rings for incoming faxes. Default (default) Custom Use this feature to control the upper limit of the ring detect frequency. Off Set the volume for the fax ring-tone. Low (default) High Type the fax number to add. Select a fax number to remove. No (default) Use this feature to add or delete numbers from the blocked fax list. The blocked fax list can contain up to 30 numbers. When the device receives a call from one of the blocked fax numbers, it deletes the incoming fax. It also logs the blocked fax in the activity log along with job-accounting information. Yes 38 Chapter 2 Control panel ENWW