HP M3027x HP LaserJet M3027/M3035 MFP - User Guide for Model Numbers CC476A/CC - Page 55
Print Quality menu, Table 2-16
UPC - 883585038671
View all HP M3027x manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Print Quality menu NOTE: Values shown with "(default)" are the factory-default values. Some menu items have no default. Table 2-16 Print Quality menu Menu item Sub-menu item Values Description Set Registration Source All trays Tray : (choose a tray) Use Set Registration to shift the margin alignment to center the image on the page from top to bottom and from left to right. You can also align the image on the front with the image printed on the back. Fuser Modes Optimize Resolution Test Page Adjust Tray Restore Modes High Transfer More Separation Line Detail Restore Optimize Select the source input tray for printing the Set Registration page. Print (button) Print a test page for setting the registration. Follow the instructions that are printed on the page to adjust each tray. Shift from -20 to 20 along the X or Y axes. 0 is the default. Perform the alignment procedure for each tray. When it creates an image, the device scans across the page from side to side as the sheet feeds from top to bottom into the device. Configure the fuser mode associated with each media type. Restore (button) Restore the fuser modes to the default settings. Normal (default) Increased Optimize print engine parameters to get the best possible print quality for all jobs in addition to specifying media type. Off (default) On Off (default) On Restore (button) Reset all the Optimize parameters to the factory default settings. 300 Use this feature to select the print resolution. 600 REt Economode Toner Density FastRes 1200 (default) ProRes 1200 Off Light Medium (default) Enable Resolution Enhancement technology (REt), which produces print output with smooth angles, curves, and edges. All print resolutions, including FastRes 1200, benefit from REt. Dark Enabled Disabled (default) When Economode is enabled, the device prints with a reduced amount of toner per page; however, the print quality of the page is slightly reduced. Choose from a range of 1 Lighten or darken the print on the page. 1 is the lightest to 5. 3 is the default. and 5 is the darkest. ENWW Use the Administration menu 43