HP OMEN 17-an000 Maintenance and Service Guide - Page 56
Solid state drive, Remove the SSD
![]() |
View all HP OMEN 17-an000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Solid state drive Description M.2 SATA SSD, PCIe NVMe TLC ● 512 GB 2280 M2 PCIe 3x4SS NVMe TLC PA ● 256 GB 2280 M2 PCIe 3x4SS NVMe TLC PA ● 128 GB 2280 M2 3x4SS Value PA ● 16 GB 2280 M2 3x4SS Value PA Spare part number 847110-004 847109-002 912322-005 L09145-014 Before removing the SSD, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Base enclosure (see Base enclosure on page 45) b. Battery (see Battery on page 38) Remove the SSD: 1. Remove the Phillips screw (1) that secures the SSD to the system board. 2. Remove the SSD (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the SSD. 44 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
![](/manual_guide/products/hewlettpackard-omen-17an000-maintenance-service-guide-d2f094f/56.png)