HP OMEN 17-an000 Maintenance and Service Guide - Page 62
WLAN module, Remove the Phillips M2.0 × 2.5 screw
View all HP OMEN 17-an000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
WLAN module Description WLAN assembly RT CARTIER ac 2 × 2 (for products with NVIDIA N17E (GTX 1070/GTX 1060) Intel Dual Band Wireless-AC 9560 802.11 ac 2 × 2 WiFi + Bluetooth 5 Combo Adapter (non vPRO) Spare part number 924813-855 LT22634-005 Before removing the WLAN module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Base enclosure (see Base enclosure on page 45) b. Battery (see Battery on page 38) c. Optical drive (see Optical drive on page 48) Remove the WLAN module: 1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The WLAN antenna cable labeled "1" connects to the WLAN module "Main" terminal labeled "1". The WLAN antenna cable labeled "2" connects to the WLAN module "Aux" terminal labeled "2". 2. Remove the Phillips M2.0 × 2.5 screw (2) that secures the WLAN module to the system board. (The WLAN module tilts up.) 50 Chapter 6 Removal and replacement procedures for authorized service provider parts