HP OMEN 17-an000 Maintenance and Service Guide - Page 72
Power in connector, Speakers see
View all HP OMEN 17-an000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Power in connector Description Spare part number For use only on products with 135 or 150 W AC adapter and NV N17P (GTX 1050/GTX 1050Ti) processors 926204-002 For use only on products with 230 W adapter AC adapter GPU NV N17E (GTX1070/GTX1060) processors 926564-001 Before removing the power in connector, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Base enclosure (see Base enclosure on page 45) b. Battery (see Battery on page 38) c. Speakers (see Speakers on page 47). d. Optical drive (see Optical drive on page 48) e. Remove the fans (see Fans on page 53) f. Remove the heatsink (see Heat sink on page 54) g. Remove the system board (see System board on page 57) Remove the power in connector: 1. Remove the two Phillips screws securing the connector and bracket to the computer (1). 60 Chapter 6 Removal and replacement procedures for authorized service provider parts