HP OMEN 17-an000 Maintenance and Service Guide - Page 59

Speakers, IMPORTANT

Get HP OMEN 17-an000 PDF manuals and user guides View all HP OMEN 17-an000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

Speakers NOTE: The speaker spare part kit includes the cable. Description Speaker Kit (includes right and left speakers) Spare part number 931598-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the speakers, follow these steps: 1. Shut down the computer. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices connected to the computer. 4. Remove the following components: a. Base enclosure (see Base enclosure on page 45) b. Battery (see Battery on page 38) Remove the speakers: 1. Carefully disconnect the speaker connector (1) from the system board. 2. Release the display cable from the routing channels (2). 3. Remove the Phillips M2.0x4 screw and Phillips M2.5x5 screw (3). 4. Lift the left and right speakers (4) to remove them. Reverse this procedure to install the speakers. Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
Speakers
NOTE:
The speaker spare part kit includes the cable.
Description
Spare part number
Speaker Kit (includes right and left speakers)
931598-001
IMPORTANT:
Make special note of each screw and screw lock size and location during removal
and replacement.
Before removing the speakers, follow these steps:
1.
Shut down the computer.
2.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3.
Disconnect all external devices connected to the computer.
4.
Remove the following components:
a.
Base enclosure (see
Base enclosure
on page
45
)
b.
Battery (see
Battery
on page
38
)
Remove the speakers:
1.
Carefully disconnect the speaker connector
(1)
from the system board.
2.
Release the display cable from the routing channels
(2)
.
3.
Remove the Phillips M2.0x4 screw and Phillips M2.5x5 screw
(3)
.
4.
Lift the left and right speakers
(4)
to remove them.
Reverse this procedure to install the speakers.
Component replacement procedures
47