HP OMEN 17-an000 Maintenance and Service Guide - Page 74
TouchPad board, Remove the system board see
![]() |
View all HP OMEN 17-an000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
TouchPad board Description TouchPad board TouchPad click button board and cable Spare part number 929472-001 931594-001 Before removing the TouchPad board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 3. Disconnect all external devices from the computer. 4. Remove the following components: a. Base enclosure (see Base enclosure on page 45) b. Battery (see Battery on page 38) c. Speakers (see Speakers on page 47). d. Optical drive (see Optical drive on page 48) e. Remove the fans (see Fans on page 53) f. Remove the heatsink (see Heat sink on page 54) g. Remove the system board (see System board on page 57) Remove the TouchPad board: 1. Disconnect the Touchpad connector cable from the system board (1). 2. Disconnect the TouchPad from the keyboard/top cover (2). 3. Carefully remove the three Phillips screws (3) that secure the TouchPad click board and the TouchPad to the computer. 4. (4) that secures the TouchPad board. 62 Chapter 6 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-omen-17an000-maintenance-service-guide-d2f094f/74.png)