HP P3005d HP LaserJet P3005 - Software Technical Reference - Page 217

● Tray 3 ● Duplex Unit (for 2-sided Printing) ● Printer Hard Disk ● Mopier Mode ● Job Storage ● VMOption Tray 3 This control specifies whether you have an optional 500-sheet feeder tray (Tray 3) installed on the printer. The default setting is Uninstalled. Duplex Unit (for 2-sided Printing) The HP LaserJet P3005 printer is equipped with automatic two-sided printing (duplexing), which allows you to print on both sides of supported media. Automatic two-sided printing is not supported for the following media types: ● Transparency ● Labels ● Cardstock ● Tough Paper ● Envelope The HP LaserJet P3005 printer supports smart duplexing. The printer detects information on both sides of the print job pages and runs the pages through the duplexing unit only if printable information appears on the second side of the page. Printer Hard Disk NOTE A printer hard disk is optional for the HP LaserJet P3005 printer. Do not select the Installed setting unless a hard disk is installed. Mopier Mode The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated copies from a single print job. Multiple-original printing (mopying) increases performance and reduces network traffic by transmitting the job to the device once, and then storing it in memory. The remainder of the copies are printed at the fastest speed. All documents that are printed in mopier mode can be created, controlled, managed, and finished from the computer, which eliminates the extra step of using a photocopier. The HP LaserJet P3005 printer supports the transmit-once mopying feature when the Mopier Mode: setting on the Device Options tab is Enabled. Job Storage When the job-storage feature is enabled, the device can store print jobs so that you can gain access to those print jobs later at the control panel. HP traditional print drivers for MS Windows ENWW HP Traditional PostScript Level 3 Emulation Driver features 193