HP PSC 1310 HP PSC 1310 series all-in-one - (English) User Guide - Page 13

on light, green, check, paper, light, check print, cartridge, explanation, what to do? - cartridges

Page 13 highlights

quick start quick start on light (green) check paper light check print explanation cartridge light what to do? Light is on. Light is blinking. Light is off. The paper tray is empty, • Load paper, or remove the the HP psc has a paper paper jam. jam, or the paper size • Change paper in paper setting and paper in paper tray to correct size. tray are not the same. • Change paper size on the computer software. Then press On/ Resume to continue. Light is on. Light is off. Light is blinking. • Print cartridge access 1 door might be open. • Print cartridges might be missing or not installed properly. 2 • Tape might not have been removed from the print cartridges. Remove the print cartridges and make sure the tape has been removed. Re-insert the print cartridges and make sure they are properly seated. • There might be a problem with the print cartridge. 3 Close the access door. If the light continues to blink, one of the print cartridges is defective. Do the following: 1 Remove the black (or photo) print cartridge. 2 Close the access door. If the light blinks, the tri-color print cartridge is defective and must be replaced. If the light does not blink, the black (or photo cartridge) is defective. For more information on this condition, click the HP psc status icon in the system tray on your computer (Windows only). Light is on. Light is Light is The print carriage is blinking. blinking. stalled. Open the print carriage access door and make sure the carriage is not obstructed. user guide 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

user guide
quick start
5
quick start
Light is on.
Light is
blinking.
Light is off.
The paper tray is empty,
the HP psc has a paper
jam, or the paper size
setting and paper in paper
tray are not the same.
Load paper, or remove the
paper jam.
Change paper in paper
tray to correct size.
Change paper size on the
computer software.
Then press On/ Resume to
continue.
Light is on.
Light is off.
Light is
blinking.
Print cartridge access
door might be open.
Print cartridges might
be missing or not
installed properly.
Tape might not have
been removed from the
print cartridges.
There might be a
problem with the print
cartridge.
1
Remove the print
cartridges and make
sure the tape has been
removed.
2
Re-insert the print
cartridges and make
sure they are properly
seated.
3
Close the access door.
If the light continues to blink,
one of the print cartridges is
defective. Do the following:
1
Remove the black (or
photo) print cartridge.
2
Close the access door.
If the light blinks, the tri-color
print cartridge is defective
and must be replaced. If the
light does not blink, the black
(or photo cartridge) is
defective.
For more information on this
condition, click the HP psc
status icon in the system tray
on your computer (Windows
only).
Light is on.
Light is
blinking.
Light is
blinking.
The print carriage is
stalled.
Open the print carriage
access door and make sure
the carriage is not
obstructed.
on light
(green)
check
paper
light
check print
cartridge
light
explanation
what to do?