HP PSC 1310 HP PSC 1310 series all-in-one - (English) User Guide - Page 22

load envelopes, load postcards, Hagaki cards, or 4 by 6 inch (10 by 15 cm) photo paper - for windows 8

Page 22 highlights

chapter 2 load envelopes Use the print feature of your word processing software to print to envelopes with your HP PSC. Use envelopes for printing only; copying on to an envelope is not recommended. Do not use shiny or embossed envelopes, or envelopes that have clasps or windows. You can load the paper tray with one or multiple envelopes. Note: Consult the help files in your word processing software for details on how to format text for printing on envelopes. 1 Remove all paper from the paper tray. 2 Slide an envelope into the tray, with the envelope flap up and to the left (print side down), until it stops. Do not force the envelope in too far. load originals & paper 3 Adjust the paper-width guide against the envelope. Be careful not to bend the envelope. Do not overload the paper tray when loading multiple envelopes. Make sure the stack of envelopes is no higher than the top of the paper-width guide. load postcards, Hagaki cards, or 4 by 6 inch (10 by 15 cm) photo paper The following is the procedure for loading postcards, Hagaki cards, or 4 by 6 inch (10 by 15 cm) photo paper. 1 Remove all paper from the paper tray, and then slide a stack of cards into the tray until it stops. Insert the short edge of the card into the HP psc first. Make sure the print side faces down. Note: If you are using photo paper with perforated tabs, load the photo paper so that the tabs face out towards you. 2 Adjust the paper-width guide against the cards until it stops. Make sure the cards fit within the tray. Do not overload it. The stack should be no higher than the top of the paper-width guide. 14 hp psc 1310 series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78

hp psc 1310 series
chapter 2
14
load originals & paper
load envelopes
Use the print feature of your word processing software to print to envelopes with
your HP PSC. Use envelopes for printing only; copying on to an envelope is not
recommended. Do not use shiny or embossed envelopes, or envelopes that have
clasps or windows. You can load the paper tray with one or multiple envelopes.
Note:
Consult the help files in your word processing software for details on
how to format text for printing on envelopes.
1
Remove all paper from the paper tray.
2
Slide an envelope into the tray, with the envelope flap up and to the left
(print side down), until it stops. Do not force the envelope in too far.
3
Adjust the paper-width guide against the envelope.
Be careful not to bend the envelope.
Do not overload the paper tray when loading multiple envelopes. Make
sure the stack of envelopes is no higher than the top of the paper-width
guide.
load postcards, Hagaki cards, or 4 by 6 inch (10 by 15 cm)
photo paper
The following is the procedure for loading postcards, Hagaki cards, or 4 by 6
inch (10 by 15 cm) photo paper.
1
Remove all paper from the paper tray, and then slide a stack of cards into
the tray until it stops. Insert the short edge of the card into the HP psc first.
Make sure the print side faces down.
Note:
If you are using photo paper with perforated tabs, load the photo
paper so that the tabs face out towards you.
2
Adjust the paper-width guide against the cards until it stops.
Make sure the cards fit within the tray. Do not overload it. The stack should
be no higher than the top of the paper-width guide.