HP PSC 1310 HP PSC 1310 series all-in-one - (English) User Guide - Page 39
Press firmly until the print cartridge snaps into place., side of the print carriage.
View all HP PSC 1310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
maintain your hp psc Note: It is normal to see ink buildup in the print cartridge slots. 4 Remove the new print cartridge from its packaging and, being careful to touch only the bright pink plastic tab, gently remove the plastic tape to uncover the ink nozzles. maintain your hp psc Caution! Do not touch the copper-colored contacts or ink nozzles. After you have removed the plastic tape, install the print cartridge immediately to prevent the ink from drying in the nozzles. 5 Hold the black print cartridge with the HP label on top. Slide the print cartridge at a slight angle into the right side of the print carriage. Press firmly until the print cartridge snaps into place. Caution! Do not attempt to push the cartridge straight into the slot. It must slide in at a slight angle. 6 Hold the tri-color print cartridge with the HP label on top. Slide the print cartridge at a slight angle into the left side of the print carriage. Press firmly until the print cartridge snaps into place. Caution! Do not attempt to push the cartridge straight into the slot. It must slide in at a slight angle. Note: You must install both print cartridges in order for your HP psc to work. user guide 31