HP PSC 1310 HP PSC 1310 series all-in-one - (English) User Guide - Page 69

hp gallery [Macintosh]., If the essential icons do not appear, remove the software and then

Get HP PSC 1310 - All-in-One Printer PDF manuals and user guides View all HP PSC 1310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

problem A red X or yellow triangle appears on the USB connect prompt possible cause and solution troubleshooting information do the following 1 Verify that the front panel cover is firmly adhered to the device, then unplug the HP psc and plug it in again. For more information on how to attach the front panel cover, see I received a message to attach the front panel cover on page 64. 2 Verify that the USB and power cables are plugged in. troubleshooting 3 Verify that the USB cable is set up properly as follows: - Unplug the USB cable and plug it in again. - Do not attach the USB cable to a keyboard or non powered hub. - Verify that the USB cable is 3 meters or less in length. - If you have several USB devices attached to your computer, you might want to unplug the other devices during the installation. 4 Continue with the installation and reboot the computer when prompted. Then open director and check for the essential icons (scan picture, scan document, and hp image zone [Windows] or hp gallery [Macintosh]). If the essential icons do not appear, remove the software and then reinstall it as described in Some of the icons are missing in the hp director on page 62. I received a message Try to continue with the installation. If that doesn't work, stop and then that an unknown error restart the installation. has occurred user guide 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
user guide
troubleshooting information
61
troubleshooting
A red X or yellow
triangle appears on
the USB connect
prompt
do the following
1
Verify that the front panel cover is firmly adhered to the device,
then unplug the HP psc and plug it in again.
For more information on how to attach the front panel cover, see
I
received a message to attach the front panel cover
on page 64.
2
Verify that the USB and power cables are plugged in.
3
Verify that the USB cable is set up properly as follows:
–
Unplug the USB cable and plug it in again.
–
Do not attach the USB cable to a keyboard or non powered
hub.
–
Verify that the USB cable is 3 meters or less in length.
–
If you have several USB devices attached to your computer, you
might want to unplug the other devices during the installation.
4
Continue with the installation and reboot the computer when
prompted. Then open director and check for the essential icons
(scan picture, scan document, and hp image zone [Windows] or
hp gallery [Macintosh]).
If the essential icons do not appear, remove the software and then
reinstall it as described in
Some of the icons are missing in the
hp director
on page 62.
I received a message
that an unknown error
has occurred
Try to continue with the installation. If that doesn’t work, stop and then
restart the installation.
problem
possible cause and solution