HP Pavilion 11-h013dx HP Pavilion 11 x2 PC Maintenance and Service Guide - Page 39

Sensor board

Get HP Pavilion 11-h013dx PDF manuals and user guides View all HP Pavilion 11-h013dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

CAUTION: Before positioning the tablet with the display screen facing down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display screen. 1. Place the tablet on a flat work surface, with the display screen facing down and the rear-facing webcamera toward you. 2. Lift up on the top edge of the display enclosure (1) until the tabs built into the enclosure release from the display panel assembly. 3. Remove the display enclosure (2) from the tablet. 4. Remove the display enclosure. Reverse this procedure to install the display enclosure. Sensor board Description Sensor board (includes cable, double-sided adhesive, and microphone) Spare part number 742731-001 Before removing the sensor board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display enclosure (see Display enclosure on page 30). Tablet component replacement procedures 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
CAUTION:
Before positioning the tablet with the display screen facing down, make sure the work
surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result
in damage to the display screen.
1.
Place the tablet on a flat work surface, with the display screen facing down and the rear-facing
webcamera toward you.
2.
Lift up on the top edge of the display enclosure
(1)
until the tabs built into the enclosure release
from the display panel assembly.
3.
Remove the display enclosure
(2)
from the tablet.
4.
Remove the display enclosure.
Reverse this procedure to install the display enclosure.
Sensor board
Description
Spare part number
Sensor board (includes cable, double-sided adhesive, and microphone)
742731-001
Before removing the sensor board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the display enclosure (see
Display enclosure
on page
30
).
Tablet component replacement procedures
31