HP Pavilion 11-h013dx HP Pavilion 11 x2 PC Maintenance and Service Guide - Page 55
TouchScreen board, Disconnect the tablet battery cable from the system board see
View all HP Pavilion 11-h013dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Reverse this procedure to install the heat sink. TouchScreen board Description TouchScreen board (includes cable and double-sided adhesive) Spare part number 742734-001 Before removing the TouchScreen board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display enclosure (see Display enclosure on page 30). 5. Disconnect the tablet battery cable from the system board (see Sensor board on page 31). 6. Remove the heat sink (see Heat sink on page 45). Tablet component replacement procedures 47