HP Pavilion 11-h013dx HP Pavilion 11 x2 PC Maintenance and Service Guide - Page 76
Audio/USB board, Remove the Phillips PM1.50×2.25 screw
View all HP Pavilion 11-h013dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Remove the power connector cable: 1. Disconnect the power connector cable (1) from the docking board. 2. Remove the Phillips PM1.50×2.25 screw (2) that secures the power connector to the keyboard/ top cover. 3. Remove the power connector cable (3). Reverse this procedure to install the power connector cable. Audio/USB board Description Audio/USB board (includes audio-out/audio-in combo jack and USB 2.0 port) Spare part number 742733-001 Before removing the audio/USB board, follow these steps: 1. Turn off the tablet and keyboard base. If you are unsure whether the tablet and keyboard base are off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet and keyboard base by unplugging the power cord from the tablet and keyboard base. 3. Disconnect the tablet from the keyboard base. 68 Chapter 5 Removal and replacement procedures