HP Pavilion 11-h013dx HP Pavilion 11 x2 PC Maintenance and Service Guide - Page 73
Remove the card reader board, and cable.
View all HP Pavilion 11-h013dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Remove the card reader board: 1. Release the ZIF connector (1) to which the card reader board cable is attached, and then disconnect the card reader board cable from the HDMI/USB board. 2. Remove the two Phillips PM1.85×2.75 broad head screws (2) that secure the card reader board to the keyboard/top cover. 3. Remove the card reader board (3) and cable. Reverse this procedure to install the card reader board. Keyboard base component replacement procedures 65
Remove the card reader board:
1.
Release the ZIF connector
(1)
to which the card reader board cable is attached, and then
disconnect the card reader board cable from the HDMI/USB board.
2.
Remove the two Phillips PM1.85×2.75 broad head screws
(2)
that secure the card reader board
to the keyboard/top cover.
3.
Remove the card reader board
(3)
and cable.
Reverse this procedure to install the card reader board.
Keyboard base component replacement procedures
65