HP Pavilion 11-h013dx HP Pavilion 11 x2 PC Maintenance and Service Guide - Page 62
WLAN module see, then remove the following components
View all HP Pavilion 11-h013dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Description Equipped with an Intel Celeron N2910 processor (1066-MHz FSB, quad core, 4.5 W), 2-GB of system memory, and the Windows 8 Standard operating system Equipped with an Intel Celeron N2910 processor (1066-MHz FSB, quad core, 4.5 W), 2-GB of system memory, and the FreeDOS or Linux operating system Spare part number 741031-501 741031-001 Before removing the system board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the display enclosure (see Display enclosure on page 30). 5. Disconnect the tablet battery cable from the system board (see Sensor board on page 31), and then remove the following components: a. WLAN module (see WLAN module on page 37) b. Solid-state drive (see Solid-state drive on page 43) c. Heat sink (see Heat sink on page 45) d. Power connector board (see Power connector board on page 52) 54 Chapter 5 Removal and replacement procedures