HP Pavilion 11-s000 Maintenance and Service Guide - Page 36
TouchPad board, Remove the three Phillips PM2.0×2.2 broadhead screws
View all HP Pavilion 11-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
TouchPad board NOTE: The TouchPad board spare part kit does not include the TouchPad board cable. The TouchPad board cable is available using spare part number 830763-001. Description TouchPad board Spare part number 837600-001 Before removing the TouchPad board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). Remove the TouchPad board: 1. Turn the keyboard/top cover upside down with the front toward you. 2. Remove the four Phillips PM2.0×2.8 screws (1) that secure the TouchPad board bracket and TouchPad board to the top cover. 3. Remove the three Phillips PM2.0×2.2 broadhead screws (2) that secure the TouchPad board to the top cover. 4. Remove the TouchPad board bracket (3). 5. Remove the TouchPad board (4) and cable. Reverse this procedure to install the TouchPad board. 28 Chapter 5 Removal and replacement procedures