HP Pavilion 11-s000 Maintenance and Service Guide - Page 46
Connector board, Remove the Philllips PM2.0×3.3 screw
View all HP Pavilion 11-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Connector board NOTE: The connector board spare part kit does not include the connector board cable. The connector board cable is available using spare part number 837596-001. Description Connector board (includes audio jack and USB port) Spare part number 830801-001 Before removing the connector board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). 5. Remove the battery (see Battery on page 32). Remove the connector board: 1. Release the ZIF connector (1) to which the connector board cable is attached, and then disconnect the connector board cable from the system board. 2. Detach the connector board cable (2) from the bottom cover. (The connector board cable is attached to the bottom cover with double-sided adhesive.) 3. Remove the Philllips PM2.0×3.3 screw (3) that secures the connector board to the bottom cover. 4. Remove the connector board (4). Reverse this procedure to install the connector board. 38 Chapter 5 Removal and replacement procedures