HP Pavilion 11-s000 Maintenance and Service Guide - Page 43

Disconnect the hard drive cable adapter, If it is necessary to disassemble the hard drive

Get HP Pavilion 11-s000 PDF manuals and user guides View all HP Pavilion 11-s000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). Remove the hard drive: 1. Release the ZIF connector (1) to which the hard drive connector cable is attached, and then disconnect the hard drive connector cable from the system board. 2. Remove the four Phillips PM2.0×3.0 screws (2) that secure the hard drive to the bottom cover. 3. Remove the hard drive (3). 4. If it is necessary to disassemble the hard drive: a. Disconnect the hard drive cable adapter (1) from the hard drive. b. Spread the left and right sides of the hard drive bracket (2) to release the bracket from the hard drive. Component replacement procedures 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
24
).
Remove the hard drive:
1.
Release the ZIF connector
(1)
to which the hard drive connector cable is attached, and then disconnect
the hard drive connector cable from the system board.
2.
Remove the four Phillips PM2.0×3.0 screws
(2)
that secure the hard drive to the bottom cover.
3.
Remove the hard drive
(3)
.
4.
If it is necessary to disassemble the hard drive:
a.
Disconnect the hard drive cable adapter
(1)
from the hard drive.
b.
Spread the left and right sides of the hard drive bracket
(2)
to release the bracket from
the hard drive.
Component replacement procedures
35