HP Pavilion 11-s000 Maintenance and Service Guide - Page 45
Power connector cable, from the system board.
View all HP Pavilion 11-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Power connector cable Description Power connector cable Spare part number 743480-002 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). Remove the power connector cable: 1. Disconnect the power connector cable (1) from the system board. 2. Remove the Phillips PM2.0×3.3 screw (2) that secures the power connector to the bottom cover. 3. Remove the power connector cable (3). Reverse this procedure to install the power connector cable. Component replacement procedures 37