HP Pavilion 11-s000 Maintenance and Service Guide - Page 48
System board, Reverse this procedure to install the heat sink.
View all HP Pavilion 11-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Reverse this procedure to install the heat sink. System board NOTE: The system board spare part kit includes an HDMI port, microSD card reader slot, USB port, WLAN slot, and replacement thermal material. Description Equipped with an Intel Celeron N3050 1.60-GHz (SC turbo up to 2.16-GHz) dual core processor (1600MHz FSB, 2.0-MB L2 cache, 4.0 W), 2.0-GB of system memory, and the Windows 10 operating system Equipped with an Intel Celeron N3050 1.60-GHz (SC turbo up to 2.16-GHz) dual core processor (1600MHz FSB, 2.0-MB L2 cache, 4.0 W), 2.0-GB of system memory, and a non-Windows operating system Spare part number 837616-601 837616-001 Before removing the system board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). 5. Remove the battery (see Battery on page 32). 6. Remove the WLAN module (see WLAN module on page 33). 7. Remove the heat sink (see Heat sink on page 39). Remove the system board: 40 Chapter 5 Removal and replacement procedures