HP Pavilion 11-s000 Maintenance and Service Guide - Page 40

Battery, Release the speaker cables from the routing clips

Get HP Pavilion 11-s000 PDF manuals and user guides View all HP Pavilion 11-s000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Battery Description Battery (2-cell, 37-WHr, 4.96-AHr, Li-ion; includes cable) Spare part number 824538-005 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 24). NOTE: When replacing the battery, be sure that the RTC battery (see RTC battery on page 31) is removed from the defective battery and installed on the replacement battery. Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Release the speaker cables from the routing clips (2) built into the battery. 3. Disconnect the RTC battery cable (3) from the system board. 4. Remove the six Phillips PM2.0×3.3 screws (4) that secure the battery to the bottom cover. 5. Slide the battery (5) up and back. 32 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
Battery
Description
Spare part number
Battery (2-cell, 37-WHr, 4.96-AHr, Li-ion; includes cable)
824538-005
Before removing the battery, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
24
).
NOTE:
When replacing the battery, be sure that the RTC battery (see
RTC battery
on page
31
) is removed
from the defective battery and installed on the replacement battery.
Remove the battery:
1.
Disconnect the battery cable
(1)
from the system board.
2.
Release the speaker cables from the routing clips
(2)
built into the battery.
3.
Disconnect the RTC battery cable
(3)
from the system board.
4.
Remove the six Phillips PM2.0×3.3 screws
(4)
that secure the battery to the bottom cover.
5.
Slide the battery
(5)
up and back.
32
Chapter 5
Removal and replacement procedures