HP Pavilion 15-cc600 Maintenance and Service Guide - Page 51
Solid-state drive, Shut down the computer. If you are unsure whether the computer is
View all HP Pavilion 15-cc600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
3. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: WLAN modules are designed with a notch to prevent incorrect insertion. Reverse this procedure to install the WLAN module. Solid-state drive Description For use only on computer models with model numbers 15-cc1xx and 15-cc6xx: 512-GB, 2280, PCIe, NVMe solid-state drive 256-GB, 2280, PCIe, NVMe solid-state drive For use on all computer models: 512-GB, 2280 M.2, SATA-3, solid-state drive with TLC 256-GB, 2280 M.2, SATA-3, solid-state drive with TLC 128-GB, 2280 M.2, SATA-3, solid-state drive with TLC 256-GB, 2280 M.2, SATA-3, solid-state drive 128-GB, 2280 M.2, SATA-3, solid-state drive Spare part number 933706-004 933705-005 763008-019 760615-038 759848-018 865902-019 827560-050 Before removing the solid-state drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. Component replacement procedures 43